| by admin | No comments

How to build a ‘space engine’

What is space?

A space engine?

That’s what you hear when people talk about a rocket engine, but is it actually possible to build one?

NASA recently released a video that provides a good overview of what it means to build space-based rockets, but there’s more to the process than just a basic rocket.

NASA/YouTube You’ll need a few things.

A rocket engine is a massive rocket that uses massive amounts of propellant to propel it up and into space.

It can go from the moon to Mars in about one hour, or it can go anywhere in the solar system in about three hours.

The rocket is capable of carrying a payload weighing up to 100 tons, or about 100 times the mass of the largest airplane you can fly.

The fuel inside the engine can also be used for power generation.

The propellant is a mixture of water, carbon dioxide and nitrogen, and the oxygen it produces is used for rocket propulsion.

A large part of the engine’s job is to burn off the excess gas as it travels up the exhaust nozzle to the rocket’s top.

That exhaust is then used to generate thrust, which is why rockets have an exhaust nozzle.

The exhaust nozzle can also serve as a nozzle for the engines main engines.

The engines exhaust is typically made of a combination of metals, glass and glass-like compounds.

That’s why the exhaust looks like it’s being pulled in two directions.

The combustion chamber is actually the same shape as a rocket’s engine nozzle, and there’s also a small section of the chamber that is filled with fuel, but that’s not used for the engine.

There are also a few additional elements that help make up the engine: A combustion chamber and a combustor to burn fuel.

When the combustion chamber gets to full size, it has to be refilled with fuel again, which also means that it can’t be used again until it’s full.

That process of refilling the chamber with fuel is called re-entry, and it’s where the engine is most powerful.

The engine is the largest piece of equipment inside the rocket that helps the rocket go up and get to orbit.

It’s basically like a giant rocket engine that’s about two stories tall and has a total weight of up to about 1,500 tons.

The chamber of the rocket is called the “tank,” and it contains a large number of liquid hydrogen and oxygen tanks.

The tank is filled to the top with liquid hydrogen to help the engine get going, and then it is refilled again with oxygen.

Then the engine has to get into orbit to begin the journey down to the surface of the Earth.

When it gets to the ground, the engine gets a few more tasks to perform before it can launch again.

First, the rocket needs to get itself ready to go.

The first step in launching a rocket is a series of tests that simulate the rocket going through its normal operations.

If all goes well, the first stage will have enough fuel for the rocket to reach orbit.

But before the rocket can reach orbit, it needs to refuel its tank.

The tanks fuel supply comes from three main sources: Liquid oxygen (or “LOX”) and liquid hydrogen (or LOX-2).

Liquid oxygen is a very cheap fuel, and when it’s available, it’s readily available for any launch.

It is also used in many satellites today.

Liquid hydrogen is the most abundant fuel in space.

Its most common use is for fuel for rockets that are not designed to be launched on the moon.

But when a rocket goes to the Moon, it requires fuel from a different source: Liquid water.

When a rocket takes off from Earth, the liquid oxygen tanks on the back end of the rockets boosters can be filled to about 100% of their capacity.

Then, they are loaded with water.

Liquid water is a gas, and a rocket can only use liquid water as a propellant if it has enough fuel to fuel its second stage.

So what happens when the first-stage tanks run out of fuel?

The first stage is sent out to land, but as the tank is being refilled, there’s a lot of gas still in the tank.

That gas is the liquid hydrogen.

The liquid hydrogen is what gets the rocket into orbit, and as the rocket approaches the Earth’s surface, it starts to release gas.

The gas starts to build up on the surface, and eventually the gas starts building up on top of the fuel tank.

Eventually, it builds up so much pressure that it’s breaking up the tank, and that pressure then starts building pressure again.

The pressure building up and the pressure building down are what create thrust, and you can imagine that the pressure on top is actually pushing the liquid water into the tank that’s in the fuel.

The final stage of the process is when the liquid fuel starts separating from the liquid tank.

In order for this to happen, the second stage of a rocket has to pull the liquid-oxygen tank toward the back of the first. The